Our Products
>>
Bravo Advanced Mosfet Unit #3 (Fully Computerized)
/images/Bravo-AMU-3.jpg
Click To Enlarge
Features
Fully computer controlled MOSFET switching with Active Braking
Full over current, voltage, and temperature monitoring and protection
Normal, 3-round burst, and Semi Only Operation.
Automation 3-round burst to full auto operation after trigger is held .04 secondS
Full PWM motor speed control (Ability to Decrease ROF and Increase to 100%
Soft Start to reduce motor and drive train wear
Very low trigger switch current (~10mA)
Self diagnostics at power-up and during operation.
Mode, Burst time and Motor Speed are programmed via trigger pulls
Low sound level motor "vibration" is used to signal the user
Fits in present fuse holder space and replaces old fuse with high speed electronic monitoring
Gearbox wires included
T connectors, Angled motor plugs and shrink wrap included
Technical Details Size: 50.8mm x 16.5mm x 13.5mm. 14grams (will fit in a 19mm diameter tube) Voltage Range: Accepts from 7.0v to 18.0v Power: Rated for 500amps peak, 60amps continuous. It can deliver 7000 watts of power. Low Battery Warning: Low Battery signal happens when battery drops to 85% of the initial voltage. Shutdown will occur when the battery voltage is either under 7.0V or drops below 80% capacity. Strongly recommended for use with Li-Poly batteries.
Expert Use only
See the AMU 3 in action!
Item #: BRAVO AMU 3
Manufacturer: Bravo
Bravo Advanced Mosfet Unit #3 (Fully Computerized)