|
Click To Enlarge
Features
Full active braking that is gentle enough not to harm the motor but still stops the motor very quickly.
Built-in heatsink
Built-in 30amp automatically resetting thermal fuse
All wires and connectors supplied
The MOSFET is fully protected against voltage spikes from the motor
Advanced brake timing circuit
Fully protected against static discharge
The circuit draws no current when not triggered
The trigger circuit needs considerable current to turn on preventing false firing from condensation, grease etc.
High tolerant to bad wiring, bad layout, noise etc.
Failure of the active braking MOSFET can't turn the gun uncontrollably on.
New low heating trip circuit prevents damage under very strong term short circuit conditions.
Technical Details
Size: 55mm x 16mm x 13mm. 14grams (will fit in a 19mm diameter tube)
Voltage Range: Accepts from 7.0v to 18.0v
Power: Rated for 500amps peak, 60amps continuous. It can deliver 7000 watts of power.
Expert Use only
Technical Details
Size: 55mm x 16mm x 13mm. 14grams (will fit in a 19mm diameter tube)
Voltage Range: Accepts from 7.0v to 18.0v
Power: Rated for 500amps peak, 60amps continuous. It can deliver 7000 watts of power.
Expert Use only
- Item #: Bravo Amu 2
- Manufacturer: Bravo
.jpg)
