|
Click To Enlarge
Features
Built-in Heatsink
MOSFETs are fully protected against voltage spikes from the motor
Fully protected against static discharge
The circuit draws no current when not triggered
The trigger circuit needs considerable current to turn on preventing false firing from condensation, grease etc.
High tolerant to bad wiring, bad layout, noise etc
New high current capacity 3.5mm gold plated bullet connectors included for easy connection to the MOSFET
Uses surface mounted parts to minimize size
2.5 ft. AWG#16 wires included
2ft AWG#24 signal wires included
T-connectors and shrick wrap Included
Technical Details
Size: 35xx x 17mm x 8mm (will fit in a 19mm diameter tube)
Voltage Range: Accepts from 7.0v to 18.0v
Power: Rated for 500amps peak, 60amps continuous. It can deliver 7000 watts of power.
This MOSFET is high recommended for High Rate of Fire AEGs.
Expert Use only
Technical Details
Size: 35xx x 17mm x 8mm (will fit in a 19mm diameter tube)
Voltage Range: Accepts from 7.0v to 18.0v
Power: Rated for 500amps peak, 60amps continuous. It can deliver 7000 watts of power.
This MOSFET is high recommended for High Rate of Fire AEGs.
Expert Use only
- Item #: BRAVO AMU 1
- Manufacturer: Bravo
.jpg)
